• Cyberia ANSI

    From Gryphon@46:1/116 to All on Thursday, November 05, 2015 09:55:58
    ████████████████▀▀▀▀▀▀█████████████████████████████████████████████████████████ ████████████████ ░░░░ █████████████████████████████████████████████████████████ ███▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀██████████████████████████████████████████ █▀▀ ████████████████████████████████ ▀▀███████▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▐████ █ ██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀██ ███████▌ Brough to you by ▐████ █ ██ ██ █▀█ █ █ █▀ ▀ ▀██ █▀█ ▀▄▀ ██ ███████▌ ▐████ █ ██ ▀ ▀▀▀ ▀▀ ▀ ▀▀ ▀ ▀▀▀ ▀▀▀ ▀ ▀ ██ ███████▌ Cyberia BBS ▐████ █ ▀▀████████████████████████████████▀▀ ███████▌ ▐████ ██▌░█▀▀▀▀▀▀▀▀▀▀▀▀▀██ █▀▀▀▀▀▀▀▀▀▀▀▀▀█░▐████████▌ cyberia.darktech.org:8080 ▐████ ██▌░█ ▌▄▄ ▄▄▄█▄▄▌███ █ ▌▄▄ ▄▄▄█▄▄▌██░▐████████▌ ▐████ ██▌░█ ▌░░█░░░█░░▌███ █ ▌░░█░░░█░░▌██░▐████████▌ Please Follow ▐████ ██▌▒█ ▌▄▄█▄▄▄█▄▄▌███ █ ▌▄▄█▄▄▄█▄▄▌██░▐████████▌▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄████ ██▌▒█ ▌░░█░░░█░░▌███ █ ▌░░█░░░█░░▌██▒▐█████████████████████████████████████████ ██▌▒█ ▄▄▄▄▄▄▄▄▄▄▄███ █ ▄▄▄▄▄▄▄▄▄▄▄██▒▐█████████████████████████████████████████ ██▌▓██ ██ ██ █▒▐█████████████████████████████████████████ ██▌▓█▀▀▀▀▀▀▀▀▀▀▀▀▀██ █▀▀▀▀▀▀▀▀▀▀▀▀▀█▒▐█████████████████████████████████████████ ██▌▓█ ░░░░░░░░░░░███ █ ░░░▒▒▒▓▓▓████▒▐█████████████████████████████████████████ ██▌██ ░░░░░░░░░░░███ █ ░░▒▒▒▓▓▓██▒██▓▐█████████████████████████████████████████ ██▌██ ░░░░░░░░░░░███ █ ░▒▒▒▓▓▓██▓▒██▓▐█████████████████████████████████████████ ██▌██ ░░░░░░░░░░░███ █ ▒▒▒▓▓▓██▓▓▓██▓▐█████████████████████████████████████████ ██▌██ ▄▄▄▄▄▄▄▄▄▄▄███ █ ▄▄▄▄▄▄▄▄▄▄▓██▓▐█████████████████████████████████████████ ██▌███ ██ ██ █▓▐█████████████████████████████████████████ ██▌██▀▀▀▀▀▀▀▀▀▀▀▀▀██ █▀▀▀▀▀▀▀▀▀▀▀▀▀██▐█████████████████████████████████████████ ██▌██ ░░░▒▒▒▓▓▓█████ █ ░░░▒▒▒▓▓▓█████▐█████████████████████████████████████████ ██▌██ ░░▒▒▒▓▓▓██▒███ █ ░░▒▒▒▓▓▓██▒███▐█████████████████████████████████████████ ██▌██ ░▒▒▒▓▓▓██▓▒███ █ ░▒▒▒▓▓▓██▓▒███▐█████████████████████████████████████████

    I figure'd I'd give my own test.

    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A3 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From Gryphon@46:1/116 to Gryphon on Thursday, November 05, 2015 13:29:44
    I figure'd I'd give my own test.

    Well that didn't work out like I thought. I'm still using a3. Could that be the problem?

    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A3 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From Pequito@46:1/167 to Gryphon on Thursday, November 05, 2015 15:12:00
    On 11/05/15, Gryphon said the following...

    I figure'd I'd give my own test.

    was your ANSi black and white?

    --- Mystic BBS v1.11 A4 (Windows)
    * Origin: Twinkle BBS [Albuquerque, NM] (46:1/167)
  • From g00r00@46:1/127 to Gryphon on Thursday, November 05, 2015 17:02:33
    I figure'd I'd give my own test.

    Did you turn on the ANSI flag for the message base? If not, Mystic will convert it to ASCII.

    --- Mystic BBS v1.11 A5 (Windows)
    * Origin: Sector 7 [Mystic BBS WHQ] (46:1/127)
  • From Gryphon@46:1/116 to Pequito on Thursday, November 05, 2015 17:41:11
    On 11/05/15, Pequito said the following...

    On 11/05/15, Gryphon said the following...

    I figure'd I'd give my own test.

    was your ANSi black and white?

    No, it was full ansi. I'm just running a3 is why it came out without color.

    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A3 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From Gryphon@46:1/116 to g00r00 on Thursday, November 05, 2015 17:41:28
    On 11/05/15, g00r00 said the following...

    I figure'd I'd give my own test.

    Did you turn on the ANSI flag for the message base? If not, Mystic will convert it to ASCII.

    Oh, I'll give that a try.

    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A3 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From Skuz@46:1/167 to Pequito on Thursday, November 05, 2015 16:59:23
    On 11/05/15, Pequito said the following...

    I figure'd I'd give my own test.
    was your ANSi black and white?

    Either that or he may have forgotten to enable the Allow ANSi flag for this echo area.

    --- Mystic BBS v1.11 A4 (Windows)
    * Origin: Twinkle BBS [Albuquerque, NM] (46:1/167)
  • From Pequito@46:1/167 to Gryphon on Thursday, November 05, 2015 17:25:57
    On 11/05/15, Gryphon said the following...

    No, it was full ansi. I'm just running a3 is why it came out without color.

    That's not why, more less what Skuz and g00r00 mentioned and did not have the ANSi flag on for the base.

    --- Mystic BBS v1.11 A4 (Windows)
    * Origin: Twinkle BBS [Albuquerque, NM] (46:1/167)
  • From Gryphon@46:1/116 to Skuz on Thursday, November 05, 2015 21:24:56
    On 11/05/15, Skuz said the following...

    On 11/05/15, Pequito said the following...

    I figure'd I'd give my own test.
    was your ANSi black and white?

    Either that or he may have forgotten to enable the Allow ANSi flag for this echo area.

    Ok, I turned on ANSI for the area, but I could not upload an ANSI into the editor. I would go through the process to upload an ansi, but no ansi file would get loaded into the editor. I tried it several times, and it just did not work.

    Again, I'm only at a3 right now.

    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A3 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From Skuz@46:1/102 to Gryphon on Friday, November 06, 2015 00:51:36
    On 11/05/15, Skuz said the following...

    Ok, I turned on ANSI for the area, but I could not upload an ANSI into
    the editor. I would go through the process to upload an ansi, but no
    ansi file would get loaded into the editor. I tried it several times,
    and it just did not work.
    Again, I'm only at a3 right now.

    I've had the same thing happen to me several times. After using /Upload if I didn't type the exact filename.ext with (No typos) or wrong spelling. It would not upload into the FS editor. This happen with A1 A2 A3 A4 no matter what. Sometime to took me 4 or 5 tries before I got the exact filename.ext spelling correct.. hehe. If you double and triple check the upload file, it has always work for me no matter what version i'm using.

    --- GoldED+/W32-MSVC 1.1.5-b20150715
    * Origin: flupH - fluph.darktech.org (46:1/102)
  • From wkitty42@46:1/132 to Gryphon on Friday, November 06, 2015 06:39:08
    On 11/05/15, Gryphon said the following...

    I figure'd I'd give my own test.

    Well that didn't work out like I thought. I'm still using a3. Could
    that be the problem?

    it looked great over here other than being monochrome... what was the problem you saw?

    the biggest ugly i see with many ANSI messages is the screen clearing stuff that wipes out my reader's header and footer so the available options cannot
    be seen... then others simply draw on half the screen after wiping out everything else... i hope that we might move up over here to 1.11asomething this weekend but that's not a SureThing<tm> yet :?

    --- Mystic BBS v1.10 A57 (Windows)
    * Origin: (46:1/132)
  • From Al@46:1/161 to wkitty42 on Friday, November 06, 2015 07:32:53
    On 11/06/15, wkitty42 said the following...

    the biggest ugly i see with many ANSI messages is the screen clearing stuff that wipes out my reader's header and footer so the available options cannot be seen... then others simply draw on half the screen
    after wiping out everything else... i hope that we might move up over
    here to 1.11asomething this weekend but that's not a SureThing<tm> yet :?

    Did you see the one I posted yesterday and did it look OK? That ansi does
    clear the screen but I think it took that out..

    --- Mystic BBS v1.11 A5 (Linux)
    * Origin: The Rusty MailBox - Penticton, BC Canada (46:1/161)
  • From g00r00@46:1/127 to Gryphon on Friday, November 06, 2015 05:44:31
    Ok, I turned on ANSI for the area, but I could not upload an ANSI into
    the editor. I would go through the process to upload an ansi, but no
    ansi file would get loaded into the editor. I tried it several times,
    and it just did not work.

    Again, I'm only at a3 right now.

    There hasn't been any change to the message upload code in many years. Make sure you are typing the file name correctly because it has to be exact casing etc.

    --- Mystic BBS v1.11 A5 (Windows)
    * Origin: Sector 7 [Mystic BBS WHQ] (46:1/127)
  • From Gryphon@46:1/116 to Skuz on Friday, November 06, 2015 10:49:08
    ▐▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█
    ▄▄▄▄▄█▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▌
    ▐▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄░▒░▄▀▀▀▀▀
    ▀▀▀▀▀▀▀▀▀▀▀▄▌
    ▐██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▌▒▒▒▐█▀
    ▀▀▀▀▀▀▀▀▀▀▀▀▀██▌
    ▐▀▀▌ ▐▄▄▓▓██▐
    ░▒░▌██▓▓▄▄▌ ▐▀▀
    ▌ ▐██
    ▌ ▐▄▄▓▓████▐█▀▄▀
    █▌█ ▓▓▄▄▌ ▐██
    ▌ ▐██
    ▌ ▐▓▓███████▐████ ▌█
    ▓▓▌ ▐██▌
    ▐██▌ ▐▓██▄▀███
    █▐████ ▌█ ▀▄ ▓
    ▐ ▐██▌
    ▐██▌ ▐▄▓█▄▀███
    ▀▄█▐████ ▌ ▄▀ ▀▄
    ▓▄▌ ▐██▌
    ▐██▌ ▐▓████▄▀
    ▄█▀█▄▄▄▄▄▀▀ ▄█▄▄ ▓▐ ▐██
    ▌ ▐██ ▄▓▓███
    ▐█ ▌██████ ██▐████▌
    ▓▓▀███▌ ▐
    ██▐▓▓█████ ██▀███████ ██
    ▀████ ▓▓▐██▌
    ▐██▐▓▓█▄▄██▀█
    █████████ ██ ▀ ▄▄ ▓▓▐██▌
    ▐██▐▓▓██ ▀▄
    ███████████ ██ ▄▀ ▓▓▐██
    ▌ ▐▌▀▐▓▓█████
    ▀▀▄████████ ██ ▄▀▀ ▓▓▐▌
    ▀▌ ▐
    ▓▓▓█ ▌
    ▌▐▀▀▌ ▐▀▓
    █ ▌ ▄▀
    ▌ ▀▐████
    ███▀▄█▐█████▌ ▄▀ ▄
    ▌ ▌
    ██▌████ ▀▐███ █▌▀ ▌ ▄█
    ▌█▌██
    ██ ▌█████▐ ▌ ▐
    ▐▀▌████ ▌████
    ▐ ▌▄▌
    ▀▀▄ ▌ ████▐ ▄█▀▀
    ▀▀▀█▀
    ▄▌█████▐▄▄ ▀▀▀
    "No matter where you go, there you are!" - Buckaroo Bonzai

    --- Mystic BBS v1.11 A5 (Linux)
    * Origin: Cyberia BBS | Cyberia.Darktech.Org | Kingwood, TX (46:1/116)
  • From g00r00@46:1/127 to Al on Friday, November 06, 2015 12:21:27
    Did you see the one I posted yesterday and did it look OK? That ansi does clear the screen but I think it took that out..

    He's using a version of Mystic that is probably 1.5 years old, so its not
    going to work for him. But yes, Mystic reprocesses any ANSI you upload into the FS editor.

    --- Mystic BBS v1.11 (Windows)
    * Origin: Sector 7 [Mystic BBS WHQ] (46:1/127)
  • From wkitty42@46:1/132 to g00r00 on Saturday, November 07, 2015 12:39:59
    On 11/06/15, g00r00 said the following...

    Did you see the one I posted yesterday and did it look OK? That ansi clear the screen but I think it took that out..

    He's using a version of Mystic that is probably 1.5 years old,

    hahaha... it ain't been that long... it may feel like it, though O:)

    tess' old 1.10alphasomething is only one or two ahead of this one and it is dated Feb 13 2015...

    trying to find time to advance... will probably just drop 1.11 straight in and start all over again... that's probably easier than rooting through everything to find the theme strings and everything else that's new and needs to be added... i haven't heard from tess so i don't know what she wants to do but i don't think i'm going to try to work with her remake of my RA setup which
    still needs more system and user variables to get all the details available...

    --- Mystic BBS v1.10 A57 (Windows)
    * Origin: (46:1/132)
  • From g00r00@46:1/127 to wkitty42 on Saturday, November 07, 2015 14:42:09
    tess' old 1.10alphasomething is only one or two ahead of this one and it is dated Feb 13 2015...

    Ahh, well 1.10 was out like 9 months ago and you were 7 or so alphas behind 1.10 so I just took a stab at it :)

    what she wants to do but i don't think i'm going to try to work with her remake of my RA setup which still needs more system and user variables
    to get all the details available...

    I'm curious as to what you are struggling with to make it look like RA?

    --- Mystic BBS v1.12 A1 (Windows)
    * Origin: Sector 7 [Mystic BBS WHQ] (46:1/127)
  • From wkitty42@46:1/132 to g00r00 on Wednesday, November 11, 2015 10:11:11
    On 11/07/15, g00r00 said the following...

    tess' old 1.10alphasomething is only one or two ahead of this one and is dated Feb 13 2015...

    Ahh, well 1.10 was out like 9 months ago and you were 7 or so alphas behind 1.10 so I just took a stab at it :)

    hahaha... i hear that :)

    what she wants to do but i don't think i'm going to try to work with remake of my RA setup which still needs more system and user variable to get all the details available...

    I'm curious as to what you are struggling with to make it look like RA?

    there are many system and user variables (macros?) that are missing... things like the current area's number of messages, lowest message number, highest message number and similar... some of the same for the files areas...

    i'll try to paste some examples...

    [quote]
    Name : [FIDO] MYSTIC Number : [ 267]
    Group : FIDONet Backbone Areas Number : [ 2]
    msgs : 1749 count : 2127 to 3875 Last Read : 3875
    -----------------------------------------------------------------------------
    (R)ead Msgs (E)nter Msg (K)ill a Msg (S)can Msgs (N)ew Msgs
    (J)oin Areas (Q)uickScan (M)ailbox Scan (*)Read New Msgs

    AREA CHANGE OPTIONS GROUP CHANGE OPTIONS
    (A)rea Change (G)roup Change
    (<)Previous (>)Next ({)Previous (})Next
    (/)Goto Known Area (=)Read a Selected Group

    (O)ffline Mail
    (I)nternet Address

    (-)Return (!)Logoff (?)Help Me! (#)Area Rules
    -----------------------------------------------------------------------------
    Node : 11 Session Time Remaining : 839 minutes Credits : 998008

    Make Your Selection, star child : _
    [/quote]

    [quote]
    Name : ORE: Software by Erik Oredson Number : [ 337]
    Group : Fidonet Files Distribution System Number : [ 4]
    -----------------------------------------------------------------------------
    (L)ist Files (D)ownload (U)pload (V)iew Archive (N)ew Files
    (K)eyword (F)ilename (T)ype a File (E)dit Tag List (P)rotocol

    AREA CHANGE OPTIONS FILE AREA ACCOUNT STATS
    (A)rea Uploads : 113 (139108k)
    (<) Previous (>) Next Downloads : 143 (41818k)
    (/) Goto Known Area Tagged : 0 (0k)

    GROUP CHANGE OPTIONS FILE AREA LIMITS
    (G)roup Ratios : 0 (0k)
    ({) Previous (}) Next Daily D/L : 64000k

    (-) Return (!) Logoff
    -----------------------------------------------------------------------------
    Node : 11 Session Time Remaining : 838 minutes Credits : 998008

    Make Your Selection, star child : _
    [/quote]

    --- Mystic BBS v1.10 A57 (Windows)
    * Origin: (46:1/132)