• echomail dupes

    From Zylone@21:3/150 to All on Thu Aug 19 03:06:43 2021
    Hey everyone.. to make a long story short.. I messed up my echomail and I started over with the group/bases in my config. Now, when I do an areafix rescan, it just ignores all the older messages because it thinks they are dupes.

    Is there any way I can reover from this mishap?

    Thanks!

    |15Z|07ylone

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
    * Origin: pLANET cARAVAN BBS (21:3/150)
  • From Zip@21:1/202 to Zylone on Thu Aug 19 14:15:06 2021
    Hello Zylone!

    On 19 Aug 2021, Zylone said the following...
    Hey everyone.. to make a long story short.. I messed up my echomail and I started over with the group/bases in my config. Now, when I do an areafix rescan, it just ignores all the older messages because it thinks they are dupes.

    Is there any way I can reover from this mishap?

    You might want to remove echodupes.dat from the Mystic data directory -- I believe that's the one keeping track of what's a duplicate and not.

    Best regards
    Zip

    --- Mystic BBS v1.12 A47 2021/08/15 (Linux/64)
    * Origin: Star Collision BBS, Uppsala, Sweden (21:1/202)
  • From Zylone@21:3/150 to Zip on Thu Aug 19 09:53:11 2021
    You might want to remove echodupes.dat from the Mystic data directory --
    I believe that's the one keeping track of what's a duplicate and not.

    You are my hero! That did it!

    Now.. this gets me back to where I started when I broke it the first time. Obviously I have 10's of thousands of messages. When I set the 'New Scan
    Date' it only updates about have the bases.... so there are still 10k+ new messages for me.

    Another thing I noticed, is like this thread for example. If I load my origional message that was sent, the ']' option doesn't forward to your
    reply.

    Any ideas?

    Thank you for helping me on the dupes by the way!!

    |15Z|07ylone

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
    * Origin: pLANET cARAVAN BBS (21:3/150)
  • From Warpslide@21:3/110 to Zylone on Thu Aug 19 11:01:44 2021
    On 19 Aug 2021, Zylone said the following...

    Another thing I noticed, is like this thread for example. If I load my origional message that was sent, the ']' option doesn't forward to your reply.

    Any ideas?

    You'll need to run LinkMessages in mutil to get those linked back up.

    ./mutil -run LinkMessages

    Will do the trick, but you'll want to run this semi-regularly. I have LinkMessages set to in my mailin.ini file


    Jay

    ... Counting time is not so important as making time count.

    --- Mystic BBS v1.12 A47 2021/08/17 (Raspberry Pi/32)
    * Origin: Northern Realms (21:3/110)
  • From Zip@21:1/202 to Zylone on Thu Aug 19 17:55:28 2021
    Hello Zylone!

    On 19 Aug 2021, Zylone said the following...
    You might want to remove echodupes.dat from the Mystic data directory
    You are my hero! That did it!

    You're very welcome! ;)

    time. Obviously I have 10's of thousands of messages. When I set the
    'New Scan Date' it only updates about have the bases.... so there are still 10k+ new messages for me.

    Hmm, did you answer "yes" to the "update last read pointer for all bases" or something similar (don't remember the exact wording)?

    Otherwise, try changing your scanned bases (Z) and selecting all, then set the newscan date, then change back the newscan base setting to the bases you want, and see if it updates the newscan date correctly then...

    Another thing I noticed, is like this thread for example. If I load my origional message that was sent, the ']' option doesn't forward to your reply.
    Any ideas?

    Hmm, are you running the LinkMessages task with mutil?
    That one is required for the "threading" to work, I think.

    Best regards
    Zip

    --- Mystic BBS v1.12 A47 2021/08/17 (Linux/64)
    * Origin: Star Collision BBS, Uppsala, Sweden (21:1/202)
  • From Zylone@21:3/150 to Warpslide on Thu Aug 19 14:07:15 2021
    You'll need to run LinkMessages in mutil to get those linked back up.

    ./mutil -run LinkMessages

    Will do the trick, but you'll want to run this semi-regularly. I have LinkMessages set to in my mailin.ini file

    DONE! That fixed it right up, and I added it to my mailin. Thank you, sir!

    |15Z|07ylone

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
    * Origin: pLANET cARAVAN BBS (21:3/150)
  • From Zylone@21:3/150 to Zip on Thu Aug 19 14:10:05 2021
    Hmm, did you answer "yes" to the "update last read pointer for all
    bases" or something similar (don't remember the exact wording)?

    Otherwise, try changing your scanned bases (Z) and selecting all, then
    set the newscan date, then change back the newscan base setting to the bases you want, and see if it updates the newscan date correctly then...
    Yes sir, I forget the name of it now as well.. but when I select a date I
    tell it to do all other bases as well. I just tried selecting all bases (they were already selected) with no change.

    Hmm, are you running the LinkMessages task with mutil?
    That one is required for the "threading" to work, I think.
    I wasn't, but I am now! =) That fixed up that issue!

    |15Z|07ylone

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
    * Origin: pLANET cARAVAN BBS (21:3/150)
  • From Avon@21:1/101 to Zylone on Fri Aug 20 10:53:53 2021
    On 19 Aug 2021 at 09:53a, Zylone pondered and said...

    You might want to remove echodupes.dat from the Mystic data directory

    Yep that's the one.

    Another thing I noticed, is like this thread for example. If I load my origional message that was sent, the ']' option doesn't forward to your reply.

    You will need to run the linking function.

    --- Mystic BBS v1.12 A46 2020/08/26 (Linux/64)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)
  • From paulie420@21:2/150 to Warpslide on Thu Aug 19 19:17:30 2021
    You'll need to run LinkMessages in mutil to get those linked back up.

    ./mutil -run LinkMessages

    Will do the trick, but you'll want to run this semi-regularly. I have LinkMessages set to in my mailin.ini file

    Wow - I've never run this command ever before; and you know I have FTNs pumping thru 2o something fierce. I still don't know ... the full story with my FTN setup.

    Guess I *really* need to take a beginners class.



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A47 2021/08/08 (Raspberry Pi/32)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
  • From Warpslide@21:3/110 to paulie420 on Fri Aug 20 08:57:28 2021
    On 19 Aug 2021, paulie420 said the following...

    Guess I *really* need to take a beginners class.

    Maybe with Avon going into lockdown he can come up with a Udemy class or something he can charge for... ;)


    Jay

    ... Training a child is more or less a matter of pot luck.

    --- Mystic BBS v1.12 A47 2021/08/19 (Raspberry Pi/32)
    * Origin: Northern Realms (21:3/110)
  • From Zip@21:1/202 to Zylone on Fri Aug 20 15:40:04 2021
    Hello Zylone!

    On 19 Aug 2021, Zylone said the following...
    Yes sir, I forget the name of it now as well.. but when I select a date I tell it to do all other bases as well. I just tried selecting all bases (they were already selected) with no change.

    Hmm... Really strange then...

    Hmm, are you running the LinkMessages task with mutil?
    I wasn't, but I am now! =) That fixed up that issue!

    Glad to hear that! :)

    Best regards
    Zip

    --- Mystic BBS v1.12 A47 2021/08/17 (Linux/64)
    * Origin: Star Collision BBS, Uppsala, Sweden (21:1/202)
  • From MeaTLoTioN@21:1/158 to paulie420 on Fri Aug 20 16:52:30 2021
    Guess I *really* need to take a beginners class.

    I would be happy to do some videos also for some stuff time permitting.

    ---
    |14Best regards,
    |11Ch|03rist|11ia|15n |11a|03ka |11Me|03aTLoT|11io|15N

    |07── |08[|10eml|08] |15ml@erb.pw |07── |08[|10web|08] |15www.erb.pw |07───┐ |07── |08[|09fsx|08] |1521:1/158 |07── |08[|11tqw|08] |151337:1/101 |07┬──┘ |07── |08[|12rtn|08] |1580:774/81 |07─┬ |08[|14fdn|08] |152:250/5 |07───┘
    |07── |08[|10ark|08] |1510:104/2 |07─┘

    ... Honk if you love peace and quiet!

    --- Mystic BBS v1.12 A47 2021/08/10 (Linux/64)
    * Origin: thE qUAntUm wOrmhOlE, rAmsgAtE, uK. bbs.erb.pw (21:1/158)