Hi! there is a way to configure Mystic with dial-up server
connection?
Not natively anymore. What I did was run SEXPOTS which will answer a modem and then connect it to telnet.
I had it running under Windows and now it's running on my Pi:
http://wiki.synchro.net/util:sexpots
Ok guys, but if SEXPOTS it is a Synchronet app and for windows, how
can I use it for my Mystic board that is mounted on a Raspberry Pi4?
There is it something similar for Linux/Raspberry Pi.
Modem Command: AT+VCID=1 Modem Response: ERROR
Modem Command: AT+VCID=1 Modem Response: ERROR
I get OK on my native USB (win)modem but an error with that command on
the US Robotics modem.
Thanks a lot! its works well (I think so), I need some guys to dial to my phone number (in Spain) to see if its really working.
If there is somebody here an want to try, my phone number its: 034971331338
034=Spain
971331338=the phone of my house.
Thanks to try! :)
From where are you calling?
Can you tell me how have to name my "Win modem" to be reconoice to my Raspberry Pi? With ttyUSB0 doesnt work.
I tried, and the answering seemed to work, however unfortunately I could only see garbage characters after the connection had been established:
ATDT0034971331338
CONNECT 14400/ARQ/V34/LAPM
µÇÿÇf├å₧₧Ç₧?■₧°₧f<`ƒ
...but it could be because I'm on a VoIP line here. =)
µÇÿÇf├å₧₧Ç₧?■₧°₧f<`ƒIncorrect baud rate?
Perhaps the other end is talking at he wrong speed to their modem?
Sysop: | Eric Oulashin |
---|---|
Location: | Beaverton, Oregon, USA |
Users: | 95 |
Nodes: | 16 (0 / 16) |
Uptime: | 08:25:55 |
Calls: | 4,626 |
Calls today: | 2 |
Files: | 8,491 |
Messages: | 348,910 |